Topic starter
yoyo!!! Here are some pictures of my DIY 10 ton press build, will update this thread with more info
STEEL PLATE MEASUREMENTS :
I drilled the 11/16th hole at 3/4" center from the corner.
?Cannabis Live Grow : https://www.twitch.tv/thebudlabca
Posted : 09/01/2022 6:34 pm
Topic starter
WE Built this LIVE on Twitch today!!
Click the Link below for the FULL Build video!
https://www.twitch.tv/videos/1259534379
?Cannabis Live Grow : https://www.twitch.tv/thebudlabca
Posted : 10/01/2022 4:54 pm
Topic starter
MATERIAL LIST:
Structural Steel Plates 6"x8"x1" THICK (I got these local so shop around!)
6" x 8" x x" Wood Top "Plate" (Table for the PID Controller)
5/8 Threaded Rod - 6 Feet (18" Sections) LINK
1/2 EMT Conduit - 10 Feet (9"-11" Sections) LINK (5/8 Rod Fits inside 1/2 Conduit WATCH CUTTING!! USE A SAW)
10 Ton Porta Power RAM - LINK
IF YOU NEED* 3x5" Caged Plates - AMAZON OR Alibaba
GRADE 8 HARDWARE
5/8 NUTS - LINK
5/8 Washers - LINK
5/8 Lock Washers - LINK
Extra Hardware
Mounting RAM Holder / Extras - 96 Piece Stainless KIT - LINK
3D Printed Custom RAM Holder - LINK
11/16th" Metal Bit - LINK
IF YOU NEED* Hydraulic Hand Pump - LINK (You can change the fitting to use one you currently have.)
?Cannabis Live Grow : https://www.twitch.tv/thebudlabca
Posted : 10/01/2022 5:20 pm
Topic starter
THINGS TO WORK ON.....
Mounting the Caged Plates System.. I want something removeable similar to Beam Clamps...
INLINE GAUGE - Tee, Nipples, Gauge (10ton)
Cross Legs / Center Supports *IF WE NEED THEM*
?Cannabis Live Grow : https://www.twitch.tv/thebudlabca
Posted : 10/01/2022 5:28 pm